View DHS250B05_9048812.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

dhs-2 dhs50a dc-dc converters power module type dh s 50 a 05 - o ordering information 1 series name 2 single output 3 output wattage 4 a : dc60-160v 5 output voltage 6 optional t : with mounting hole ( f 3.4 thru) 1 2 3 4 5 6 model dhs50a05 dhs50a12 dhs50a15 dhs50a24 max output wattage[w] 50.0 50.4 51.0 50.4 dc output 5v 10a 12v 4.2a 15v 3.4a 24v 2.1a specifications model dhs50a05 dhs50a12 dhs50a15 dhs50a24 input voltage[v] dc60 - 160 current[a] * 1 0.55a 0.55a 0.55a 0.55a efficiency[%] * 1 84.0typ 86.0typ 86.0typ 86.0typ output voltage[v] 5 121524 current[a] 10 4.2 3.4 2.1 line regulation[mv] 10max 24max 30max 48max load regulation[mv] 10max 24max 30max 48max ripple[mvp-p] 0 to +100 c * 2 80max 120max 120max 120max -40 to 0 c * 2 120max 150max 150max 150max 0 to 15% load * 2 160max 240max 240max 240max ripple noise[mvp-p] 0 to +100 c * 2 120max 150max 150max 150max -40 to 0 c * 2 200max 200max 200max 250max 0 to 15% load * 2 240max 300max 300max 300max temperature regulation[mv] 0 to +65 c 50max 120max 150max 240max -40 to +100 c 100max 240max 300max 480max drift[mv] * 3 20max 40max 60max 90max start-up time[ms] 200max (dcin 110v, io=100%) output voltage adjustment range[v] * 4 fixed (trm pin open), adjustable by external vr or external voltage 4.50 - 6.00 10.80 - 13.20 13.50 - 16.50 21.60 - 26.40 output voltage setting[v] 4.97 - 5.13 11.91 - 12.29 14.76 - 15.24 23.62 - 24.38 protection circuit and others overcurrent protection works over 105% of rating and recovers automatically overvoltage protection[v] 6.30 - 7.60 13.90 - 17.55 17.25 - 21.75 27.60 - 34.80 remote sensing nothing remote on/off provided (neqative logic l : on, h :off) isolation input-output ac3,000v 1minute, cutoff current = 10ma, dc500v 50m w min (20 15 c ) input-fg ac2,000v 1minute, cutoff current = 10ma, dc500v 50m w min (20 15 c ) output-fg ac500v 1minute, cutoff current = 100ma, dc500v 50m w min (20 15 c ) environment operating temp.,humid.and altitude -40 to +100 c (on aluminum base plate), 20 - 95%rh (non condensing) (refer to derating curve), 3,000m (10,000 feet) max storage temp.,humid.and altitude -40 to +100 c , 20 - 95%rh (non condensing), 9,000m (30,000 feet) max vibration 10 - 55hz, 49.0m/s 2 (5g), 3minutes period, 60minutes each along x, y and z axis complies with iec61373 category 1 class b impact 196.1m/s 2 (20g), 11ms, once each along x, y and z axis complies with iec61373 category 1 class b safety agency approvals ul60950-1, c-ul (csa60950-1), en60950-1 others case size/weight 58.4 x 12.7 x 37.3mm [ 2.3 x 0.5 x 1.47 inches ] (w x h x d) / 60g max cooling method conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) * 1 at rated input(dc110v) and rated load. * 2 ripple and ripple noise is measured by using measuring board. refer to the manual * 3 drift is the change in dc output for an eight hour period after a half-hour warm-up at 25 c , with the input voltage held constant at the rated input/output. * 4 refer to the manual for input range. * providing heat sink as option dhs og fjukpff &*5
dhs-3 dhs50a external view [0.2] [0.3] [0.3] [0.3] 2- f 3.5 [1.9] [0.06] [0.14] [0.1] 4- f 1.5 2- f 2.5 lot no. 2-m3 2- f 2 [0.08] 0.2 4- f 1 [0.04] 0.1 -vin rc +vin -vout trm +vout 27.9 0.5 1.27 7.62 5.08 [0.05] [0.3] [0.2] (5.0) [0.2] (4.7) [0.19] 48.3 0.5 48.3 37.3 max 58.4 [1.9] [2.3] max 7.62 7.62 [1.1] [1.47] [0.3] [0.3] 12.7 0.5 5.0 [0.5] [0.2] 0.5 7.62 5.08 7.62 7.62 ? div. : 0.2inch case(pbt) base plate(aluminum) name plate mounting hole ? dimensions in mm, [ ]=inches ? tolerance : 0.3 [ 0.012] ? weight : 60g max ? dimensions in mm, [ ]=inches ? mounting hole screwing torque : 0.49n - m (5.0kgf - cm) max (top view) recomending size for processing pcb dhs og fjukpff &*5
dhs-4 dhs100a dc-dc converters power module type dh s 100 a 05 - o ordering information 1 2 3 4 5 6 1 series name 2 single output 3 output wattage 4 a : dc60-160v 5 output voltage 6 optional t : with mounting hole ( f 3.4 thru) model dhs100a05 dhs100a12 dhs100a15 dhs100a24 max output wattage[w] 100.0 100.8 100.5 100.8 dc output 5v 20a 12v 8.4a 15v 6.7a 24v 4.2a specifications model dhs100a05 dhs100a12 dhs100a15 dhs100a24 input voltage[v] dc60 - 160 current[a] * 1 1.1a 1.1a 1.1a 1.1a efficiency[%] * 1 85.0typ 88.0typ 88.0typ 88.0typ output voltage[v] 5 121524 current[a] 20 8.4 6.7 4.2 line regulation[mv] 10max 24max 30max 48max load regulation[mv] 10max 24max 30max 48max ripple[mvp-p] 0 to +100 c * 2 80max 120max 120max 120max -40 to 0 c * 2 120max 150max 150max 150max 0 to 15% load * 2 160max 240max 240max 240max ripple noise[mvp-p] 0 to +100 c * 2 120max 150max 150max 150max -40 to 0 c * 2 200max 200max 200max 250max 0 to 15% load * 2 240max 300max 300max 300max temperature regulation[mv] 0 to +65 c 50max 120max 150max 240max -40 to +100 c 100max 240max 300max 480max drift[mv] * 3 20max 40max 60max 90max start-up time[ms] 200max (dcin 110v, io=100%) output voltage adjustment range[v] * 4 fixed (trm pin open), adjustable by external vr or external voltage 4.50 - 6.00 10.80 - 13.20 13.50 - 16.50 21.60 - 26.40 output voltage setting[v] 4.97 - 5.13 11.91 - 12.29 14.76 - 15.24 23.62 - 24.38 protection circuit and others overcurrent protection works over 105% of rating and recovers automatically overvoltage protection[v] 6.30 - 7.60 13.90 - 17.55 17.25 - 21.75 27.60 - 34.80 remote sensing nothing remote on/off provided (neqative logic l : on, h :off) isolation input-output ac3,000v 1minute, cutoff current = 10ma, dc500v 50m w min (20 15 c ) input-fg ac2,000v 1minute, cutoff current = 10ma, dc500v 50m w min (20 15 c ) output-fg ac500v 1minute, cutoff current = 100ma, dc500v 50m w min (20 15 c ) environment operating temp.,humid.and altitude -40 to +100 c (on aluminum base plate), 20 - 95%rh (non condensing) (refer to derating curve), 3,000m (10,000 feet) max storage temp.,humid.and altitude -40 to +100 c , 20 - 95%rh (non condensing), 9,000m (30,000 feet) max vibration 10 - 55hz, 49.0m/s 2 (5g), 3minutes period, 60minutes each along x, y and z axis complies with iec61373 category 1 class b impact 196.1m/s 2 (20g), 11ms, once each along x, y and z axis complies with iec61373 category 1 class b safety agency approvals ul60950-1, c-ul (csa60950-1), en60950-1 others case size/weight 58.4 x 12.7 x 37.3mm [ 2.3 x 0.5 x 1.47 inches ] (w x h x d) / 60g max cooling method conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) * 1 at rated input(dc110v) and rated load. * 2 ripple and ripple noise is measured by using measuring board. refer to the manual. * 3 drift is the change in dc output for an eight hour period after a half-hour warm-up at 25 c , with the input voltage held constant at the rated input/output. * 4 refer to the manual for input range. * providing heat sink as option dhs og fjukpff &*5
dhs-5 dhs100a external view [0.2] [0.3] [0.3] [0.3] 2- f 3.5 [1.9] [0.06] [0.14] [0.1] 4- f 1.5 2- f 2.5 lot no. 2-m3 2- f 2 [0.08] 0.2 4- f 1 [0.04] 0.1 -vin rc +vin -vout trm +vout 27.9 0.5 1.27 7.62 5.08 [0.05] [0.3] [0.2] (5.0) [0.2] (4.7) [0.19] 48.3 0.5 48.3 37.3 max 58.4 [1.9] [2.3] max 7.62 7.62 [1.1] [1.47] [0.3] [0.3] 12.7 0.5 5.0 [0.5] [0.2] 0.5 7.62 5.08 7.62 7.62 ? div. : 0.2inch case(pbt) base plate(aluminum) name plate mounting hole ? dimensions in mm, [ ]=inches ? tolerance : 0.3 [ 0.012] ? weight : 60g max ? dimensions in mm, [ ]=inches ? mounting hole screwing torque : 0.49n - m (5.0kgf - cm) max (top view) recomending size for processing pcb dhs og fjukpff &*5
dhs-6 dhs200a dc-dc converters power module type dh s 200 a 05 - o ordering information 1 2 3 4 5 6 1 series name 2 single output 3 output wattage 4 a : dc60-160v 5 output voltage 6 optional t : with mounting hole ( f 3.4 thru) model dhs200a05 dhs200a12 dhs200a15 dhs200a24 max output wattage[w] 200.0 200.4 201.0 201.6 dc output 5v 40a 12v 16.7a 15v 13.4a 24v 8.4a specifications model dhs200a05 dhs200a12 dhs200a15 dhs200a24 input voltage[v] dc60 - 160 current[a] * 1 2.1a 2.1a 2.1a 2.1a efficiency[%] * 1 87.0typ 88.0typ 88.0typ 88.0typ output voltage[v] 5 121524 current[a] 40 16.7 13.4 8.4 line regulation[mv] 10max 24max 30max 48max load regulation[mv] 10max 24max 30max 48max ripple[mvp-p] 0 to +100 c * 2 80max 120max 120max 120max -40 to 0 c * 2 120max 150max 150max 150max 0 to 15% load * 2 160max 240max 240max 240max ripple noise[mvp-p] 0 to +100 c * 2 120max 150max 150max 150max -40 to 0 c * 2 200max 200max 200max 250max 0 to 15% load * 2 240max 300max 300max 300max temperature regulation[mv] 0 to +65 c 50max 120max 150max 240max -40 to +100 c 100max 240max 300max 480max drift[mv] * 3 20max 40max 60max 90max start-up time[ms] 200max (dcin 110v, io=100%) output voltage adjustment range[v] * 4 fixed (trm pin open), adjustable by external vr or external voltage 3.00 - 6.00 7.20 - 13.20 9.00 - 16.50 14.40 - 26.40 output voltage setting[v] 4.97 - 5.13 11.91 - 12.29 14.76 - 15.24 23.62 - 24.38 protection circuit and others overcurrent protection works over 105% of rating and recovers automatically overvoltage protection[v] 6.30 - 7.30 13.90 - 16.35 17.25 - 20.25 27.60 - 32.40 remote sensing provided remote on/off provided (neqative logic l : on, h :off) isolation input-output ac3,000v 1minute, cutoff current = 10ma, dc500v 50m w min (20 15 c ) input-fg ac2,000v 1minute, cutoff current = 10ma, dc500v 50m w min (20 15 c ) output-fg ac500v 1minute, cutoff current = 100ma, dc500v 50m w min (20 15 c ) environment operating temp.,humid.and altitude -40 to +100 c (on aluminum base plate), 20 - 95%rh (non condensing) (refer to derating curve), 3,000m (10,000 feet) max storage temp.,humid.and altitude -40 to +100 c , 20 - 95%rh (non condensing), 9,000m (30,000 feet) max vibration 10 - 55hz, 49.0m/s 2 (5g), 3minutes period, 60minutes each along x, y and z axis complies with iec61373 category 1 class b impact 196.1m/s 2 (20g), 11ms, once each along x, y and z axis complies with iec61373 category 1 class b safety agency approvals ul60950-1, c-ul (csa60950-1), en60950-1 others case size/weight 58.4 x 12.7 x 61mm [ 2.3 x 0.5 x 2.4 inches ] (w x h x d) / 100g max cooling method conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) * 1 at rated input(dc110v) and rated load. * 2 ripple and ripple noise is measured by using measuring board. refer to the manual. * 3 drift is the change in dc output for an eight hour period after a half-hour warm-up at 25 c , with the input voltage held constant at the rated input/output. * 4 refer to the manual for input range. * providing heat sink as option dhs og fjukpff &*5
dhs-7 dhs200a external view rc +vin -vout -vin -s trm +s +vout 6- f 1 [0.04] 0.1 4- f 3.5 [0.14] [1.9] 2- f 2 0.2 4-m3 lot no. [0.3] [0.3] [0.2] [0.2] [0.2] 6- f 1.5 [0.06] 2- f 2.5 [0.1] [0.2] [0.3] [2.0] 50.8 (5.0) 48.3 0.5 (5.1) [0.2] 48.3 58.4 [0.08] [0.2] [1.9] [2.3] max 61 [2] [2.4] max 5.0 0.5 0.5 12.7 [0.2] [0.5] 0.5 50.8 12.7 12.7 [0.5] [0.5] 10.16 10.16 7.62 7.62 [0.4] [0.4] [0.3] [0.3] 7.62 5.08 5.08 7.62 7.62 5.08 5.08 ? dimensions in mm, [ ]=inches ? div. : 0.2inch ? dimensions in mm, [ ]=inches (top view) recomending size for processing pcb case(pbt) base plate(aluminum) name plate mounting hole ? tolerance : 0.3 [ 0.012] ? weight : 100g max ? mounting hole screwing torque : 0.49n - m (5.0kgf - cm) max dhs og fjukpff &*5
dhs-8 dhs50b dc-dc converters power module type dh s 50 b 05 - o ordering information 1 series name 2 single output 3 output wattage 4 b : dc200-400v 5 output voltage 6 optional t : with mounting hole ( f 3.4 thru) 1 2 3 4 5 6 model dhs50b03 dhs50b05 dhs50b12 dhs50b15 dhs50b24 dhs50b28 max output wattage[w] 33.0 50.0 50.4 51.0 50.4 50.4 dc output 3.3v 10a 5v 10a 12v 4.2a 15v 3.4a 24v 2.1a 28v 1.8a specifications model dhs50b03 dhs50b05 dhs50b12 dhs50b15 dhs50b24 dhs50b28 input voltage[v] dc200 - 400 current[a] * 1 0.15a 0.22a 0.22a 0.22a 0.22a 0.22a efficiency[%] * 1 77.0typ 80.0typ 83.0typ 83.0typ 83.0typ 82.0typ output voltage[v] 3.35 12152428 current[a] 10 10 4.2 3.4 2.1 1.8 line regulation[mv] 10max 10max 24max 30max 48max 56max load regulation[mv] 10max 10max 24max 30max 48max 56max ripple[mvp-p] 0 to +100 c * 2 80max 80max 120max 120max 120max 120max -40 to 0 c * 2 120max 120max 150max 150max 150max 150max 0 to 15% load * 2 160max 160max 240max 240max 240max 240max ripple noise[mvp-p] 0 to +100 c * 2 120max 120max 150max 150max 150max 150max -40 to 0 c * 2 200max 200max 200max 200max 250max 250max 0 to 15% load * 2 240max 240max 300max 300max 300max 300max temperature regulation[mv] 0 to +65 c 35max 50max 120max 150max 240max 280max -40 to +100 c 66max 100max 240max 300max 480max 560max drift[mv] * 3 16max 20max 40max 60max 90max 90max start-up time[ms] 200max (dcin 280v, io=100%) output voltage adjustment range[v] * 4 fixed (trm pin open), adjustable by external vr or external voltage 2.97 - 3.96 4.50 - 6.00 10.80 - 13.20 13.50 - 16.50 21.60 - 26.40 25.20 - 30.80 output voltage setting[v] 3.30 - 3.40 4.97 - 5.13 11.91 - 12.29 14.76 - 15.24 23.62 - 24.38 27.56 - 28.44 protection circuit and others overcurrent protection works over 105% of rating and recovers automatically overvoltage protection[v] 4.20 - 5.70 6.30 - 7.60 13.90 - 17.55 17.25 - 21.75 27.60 - 34.80 32.20 - 40.60 remote sensing none remote on/off provided (neqative logic l : on, h :off) isolation input-output ac3,000v 1minute, cutoff current = 10ma, dc500v 50m w min (20 15 c ) input-fg ac2,000v 1minute, cutoff current = 10ma, dc500v 50m w min (20 15 c ) output-fg ac500v 1minute, cutoff current = 100ma, dc500v 50m w min (20 15 c ) environment operating temp.,humid.and altitude -40 to +100 c (on aluminum base plate), 20 - 95%rh (non condensing) (refer to derating curve), 3,000m (10,000 feet) max storage temp.,humid.and altitude -40 to +100 c , 20 - 95%rh (non condensing), 9,000m (30,000 feet) max vibration 10 - 55hz, 49.0m/s 2 (5g), 3minutes period, 60minutes each along x, y and z axis impact 196.1m/s 2 (20g), 11ms, once each along x, y and z axis safety agency approvals ul60950-1, c-ul, en60950-1 others case size/weight 58.4 x 12.7 x 37.3mm [ 2.3 x 0.5 x 1.47 inches ] (w x h x d) / 60g max cooling method conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) * 1 at rated input(dc280v) and rated load. * 2 ripple and ripple noise is measured by using measuring board. refer to the manual * 3 drift is the change in dc output for an eight hour period after a half-hour warm-up at 25 c , with the input voltage held constant at the rated input/output. * 4 refer to the manual for input range. * providing heat sink as option dhs og fjukpff &*5
dhs-9 dhs50b external view [0.2] [0.3] [0.3] [0.3] 2- f 3.5 [1.9] [0.06] [0.14] [0.1] 4- f 1.5 2- f 2.5 lot no. 2-m3 2- f 2 [0.08] 0.2 4- f 1 [0.04] 0.1 -vin rc +vin -vout trm +vout 27.9 0.5 1.27 7.62 5.08 [0.05] [0.3] [0.2] (5.0) [0.2] (4.7) [0.19] 48.3 0.5 48.3 37.3 max 58.4 [1.9] [2.3] max 7.62 7.62 [1.1] [1.47] [0.3] [0.3] 12.7 0.5 5.0 [0.5] [0.2] 0.5 7.62 5.08 7.62 7.62 ? div. : 0.2inch case(pbt) base plate(aluminum) name plate mounting hole ? dimensions in mm, [ ]=inches ? tolerance : 0.3 [ 0.012] ? weight : 60g max ? dimensions in mm, [ ]=inches ? mounting hole screwing torque : 0.49n - m (5.0kgf - cm) max (top view) recomending size for processing pcb dhs og fjukpff &*5
dhs-10 dhs100b dc-dc converters power module type dh s 100 b 05 - o ordering information 1 2 3 4 5 6 1 series name 2 single output 3 output wattage 4 b : dc200-400v 5 output voltage 6 optional t : with mounting hole ( f 3.4 thru) model dhs100b03 dhs100b05 dhs100b12 dhs100b15 dhs100b24 dhs100b28 max output wattage[w] 66.0 100.0 100.8 100.5 100.8 100.8 dc output 3.3v 20a 5v 20a 12v 8.4a 15v 6.7a 24v 4.2a 28v 3.6a specifications model dhs100b03 dhs100b05 dhs100b12 dhs100b15 dhs100b24 dhs100b28 input voltage[v] dc200 - 400 current[a] * 1 0.30a 0.44a 0.42a 0.42a 0.42a 0.42a efficiency[%] * 1 79.0typ 82.0typ 85.0typ 86.0typ 86.0typ 86.0typ output voltage[v] 3.35 12152428 current[a] 20 20 8.4 6.7 4.2 3.6 line regulation[mv] 10max 10max 24max 30max 48max 56max load regulation[mv] 10max 10max 24max 30max 48max 56max ripple[mvp-p] 0 to +100 c * 2 80max 80max 120max 120max 120max 120max -40 to 0 c * 2 120max 120max 150max 150max 150max 150max 0 to 15% load * 2 160max 160max 240max 240max 240max 240max ripple noise[mvp-p] 0 to +100 c * 2 120max 120max 150max 150max 150max 150max -40 to 0 c * 2 200max 200max 200max 200max 250max 250max 0 to 15% load * 2 240max 240max 300max 300max 300max 300max temperature regulation[mv] 0 to +65 c 35max 50max 120max 150max 240max 280max -40 to +100 c 66max 100max 240max 300max 480max 560max drift[mv] * 3 16max 20max 40max 60max 90max 90max start-up time[ms] 200max (dcin 280v, io=100%) output voltage adjustment range[v] * 4 fixed (trm pin open), adjustable by external vr or external voltage 2.97 - 3.96 4.50 - 6.00 10.80 - 13.20 13.50 - 16.50 21.60 - 26.40 25.20 - 30.80 output voltage setting[v] 3.30 - 3.40 4.97 - 5.13 11.91 - 12.29 14.76 - 15.24 23.62 - 24.38 27.56 - 28.44 protection circuit and others overcurrent protection works over 105% of rating and recovers automatically overvoltage protection[v] 4.20 - 5.70 6.30 - 7.60 13.90 - 17.55 17.25 - 21.75 27.60 - 34.80 32.20 - 40.60 remote sensing none remote on/off provided (neqative logic l : on, h :off) isolation input-output ac3,000v 1minute, cutoff current = 10ma, dc500v 50m w min (20 15 c ) input-fg ac2,000v 1minute, cutoff current = 10ma, dc500v 50m w min (20 15 c ) output-fg ac500v 1minute, cutoff current = 100ma, dc500v 50m w min (20 15 c ) environment operating temp.,humid.and altitude -40 to +100 c (on aluminum base plate), 20 - 95%rh (non condensing) (refer to derating curve), 3,000m (10,000 feet) max storage temp.,humid.and altitude -40 to +100 c , 20 - 95%rh (non condensing), 9,000m (30,000 feet) max vibration 10 - 55hz, 49.0m/s 2 (5g), 3minutes period, 60minutes each along x, y and z axis impact 196.1m/s 2 (20g), 11ms, once each along x, y and z axis safety agency approvals ul60950-1, c-ul, en60950-1 others case size/weight 58.4 x 12.7 x 37.3mm [ 2.3 x 0.5 x 1.47 inches ] (w x h x d) / 60g max cooling method conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) * 1 at rated input(dc280v) and rated load. * 2 ripple and ripple noise is measured by using measuring board. refer to the manual. * 3 drift is the change in dc output for an eight hour period after a half-hour warm-up at 25 c , with the input voltage held constant at the rated input/output. * 4 refer to the manual for input range. * providing heat sink as option dhs og fjukpff &*5
dhs-11 dhs100b external view [0.2] [0.3] [0.3] [0.3] 2- f 3.5 [1.9] [0.06] [0.14] [0.1] 4- f 1.5 2- f 2.5 lot no. 2-m3 2- f 2 [0.08] 0.2 4- f 1 [0.04] 0.1 -vin rc +vin -vout trm +vout 27.9 0.5 1.27 7.62 5.08 [0.05] [0.3] [0.2] (5.0) [0.2] (4.7) [0.19] 48.3 0.5 48.3 37.3 max 58.4 [1.9] [2.3] max 7.62 7.62 [1.1] [1.47] [0.3] [0.3] 12.7 0.5 5.0 [0.5] [0.2] 0.5 7.62 5.08 7.62 7.62 ? div. : 0.2inch case(pbt) base plate(aluminum) name plate mounting hole ? dimensions in mm, [ ]=inches ? tolerance : 0.3 [ 0.012] ? weight : 60g max ? dimensions in mm, [ ]=inches ? mounting hole screwing torque : 0.49n - m (5.0kgf - cm) max (top view) recomending size for processing pcb dhs og fjukpff &*5
dhs-12 dhs250b dc-dc converters power module type dh s 250 b 05 - o ordering information 1 2 3 4 5 6 1 series name 2 single output 3 output wattage 4 b : dc200-400v 5 output voltage 6 optional t : with mounting hole ( f 3.4 thru) model dhs250b03 DHS250B05 dhs250b07 dhs250b12 dhs250b15 dhs250b24 dhs250b28 dhs250b48 max output wattage[w] 165.0 250.0 247.5 252.0 247.5 252.0 252.0 249.6 dc output 3.3v 50a 5v 50a 7.5v 33a 12v 21a 15v 16.5a 24v 10.5a 28v 9.0a 48v 5.2a specifications model dhs250b03 DHS250B05 dhs250b07 dhs250b12 dhs250b15 dhs250b24 dhs250b28 dhs250b48 input voltage[v] dc200 - 400 current[a] * 1 0.67a 1.0a 1.0a 1.0a 1.0a 1.0a 1.0a 1.0a efficiency[%] * 1 88.0typ 90.0typ 88.0typ 88.0typ 88.0typ 88.0typ 88.0typ 89.0typ output voltage[v] 3.3 5 7.5 12 15 24 28 48 current[a] 50 50 33 21 16.5 10.5 9.0 5.2 line regulation[mv] 10max 10max 20max 24max 30max 48max 56max 96max load regulation[mv] 10max 10max 20max 24max 30max 48max 56max 96max ripple[mvp-p] 0 to +100 c * 2 80max 80max 100max 120max 120max 120max 120max 200max -40 to 0 c * 2 120max 120max 130max 150max 150max 150max 150max 250max 0 to 15% load * 2 160max 160max 200max 240max 240max 240max 240max 400max ripple noise[mvp-p] 0 to +100 c * 2 120max 120max 130max 150max 150max 150max 150max 250max -40 to 0 c * 2 200max 200max 200max 200max 200max 250max 250max 400max 0 to 15% load * 2 240max 240max 260max 300max 300max 300max 300max 500max temperature regulation[mv] 0 to +65 c 35max 50max 70max 120max 150max 240max 280max 480max -40 to +100 c 66max 100max 140max 240max 300max 480max 560max 960max drift[mv] * 3 16max 20max 30max 40max 60max 90max 90max 180max start-up time[ms] 200max (dcin 280v, io=100%) output voltage adjustment range[v] * 4 fixed (trm pin open), adjustable by external vr or external voltage 1.98 - 3.96 3.00 - 6.00 4.50 - 8.25 7.20 - 13.20 9.00 - 16.50 14.40 - 26.40 16.80 - 30.80 28.80 - 52.80 output voltage setting[v] 3.30 - 3.40 4.97 - 5.13 7.43 - 7.67 11.91 - 12.29 14.76 - 15.24 23.62 - 24.38 27.56 - 28.44 47.24 - 48.76 protection circuit and others overcurrent protection works over 105% of rating and recovers automatically overvoltage protection[v] 4.20 - 4.85 6.30 - 7.30 8.70 - 10.20 13.90 - 16.35 17.25 - 20.25 27.60 - 32.40 32.20 - 37.80 55.20 - 64.80 remote sensing provided remote on/off provided (neqative logic l : on, h :off) isolation input-output ac3,000v 1minute, cutoff current = 10ma, dc500v 50m w min (20 15 c ) input-fg ac2,000v 1minute, cutoff current = 10ma, dc500v 50m w min (20 15 c ) output-fg ac500v 1minute, cutoff current = 100ma, dc500v 50m w min (20 15 c ) environment operating temp.,humid.and altitude -40 to +100 c (on aluminum base plate), 20 - 95%rh (non condensing) (refer to derating curve), 3,000m (10,000 feet) max storage temp.,humid.and altitude -40 to +100 c , 20 - 95%rh (non condensing), 9,000m (30,000 feet) max vibration 10 - 55hz, 49.0m/s 2 (5g), 3minutes period, 60minutes each along x, y and z axis impact 196.1m/s 2 (20g), 11ms, once each along x, y and z axis safety agency approvals ul60950-1, c-ul, en60950-1 others case size/weight 58.4 x 12.7 x 61mm [ 2.3 x 0.5 x 2.4 inches ] (w x h x d) / 100g max cooling method conduction cooling (e.g. heat radiation from the aluminum base plate to the attached heat sink) * 1 at rated input(dc280v) and rated load. * 2 ripple and ripple noise is measured by using measuring board. refer to the manual. * 3 drift is the change in dc output for an eight hour period after a half-hour warm-up at 25 c , with the input voltage held constant at the rated input/output. * 4 refer to the manual for input range. * providing heat sink as option dhs og fjukpff &*5
dhs-13 dhs250b external view rc +vin -vout -vin -s trm +s +vout 6- f 1 [0.04] 0.1 4- f 3.5 [0.14] [1.9] 2- f 2 0.2 4-m3 lot no. [0.3] [0.3] [0.2] [0.2] [0.2] 6- f 1.5 [0.06] 2- f 2.5 [0.1] [0.2] [0.3] [2.0] 50.8 (5.0) 48.3 0.5 (5.1) [0.2] 48.3 58.4 [0.08] [0.2] [1.9] [2.3] max 61 [2] [2.4] max 5.0 0.5 0.5 12.7 [0.2] [0.5] 0.5 50.8 12.7 12.7 [0.5] [0.5] 10.16 10.16 7.62 7.62 [0.4] [0.4] [0.3] [0.3] 7.62 5.08 5.08 7.62 7.62 5.08 5.08 ? dimensions in mm, [ ]=inches ? div. : 0.2inch ? dimensions in mm, [ ]=inches (top view) recomending size for processing pcb case(pbt) base plate(aluminum) name plate mounting hole ? tolerance : 0.3 [ 0.012] ? weight : 100g max ? mounting hole screwing torque : 0.49n - m (5.0kgf - cm) max dhs og fjukpff &*5

▲Up To Search▲

Price & Availability of DHS250B05

	To Download DHS250B05 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .